Masoureh bead

One of the tools or equipment that is used in connections is the coil nut. This nut can make connections in small diameter pipes that can be easily separated from the connections. This nut is connected to the tube using a male and female thread. Of course, the pipe nut is used not only to connect two pipes but also to connect them to other equipment. There are different types of bobbin beads that are designed and produced in different sizes and are used according to their application.

The most important feature of the tube nut is that it is designed in such a way that it can easily separate the pipes it connects without causing deformation. In any connection where this feature is needed, i.e. easy separation of the pipe or interruption of flow in the system, or piping with small holes, the spool nut is used. There are two points to consider when choosing a bead.

Parts that have a small diameter to connect.
Parts that require easy disassembly.

Masoureh nut is used as a substitute for blind flange, throat flange and slipon flange. As mentioned, these nuts are used to connect male and female pipes. When these pipes meet each other, the barrel nut creates the necessary pressure to close this connection.

The connections that are formed in the pipes may simply require long-term repair or maintenance, so the screw nut will be used in these connections, which provides us with the possibility of connecting and disconnecting many times.

Masoureh beads consist of three male and female parts at the end of each bead and the middle bead. For a connection to be effective, it must be considered that both male and female ends are sealed together. The difference between male and female is that in the male connection, the spool nut is threaded from the outside, but in the female connection, the spool nut is threaded from the inside, for this reason, it is possible to be easily replaced.

The efficiency of this part makes the demand for it high, and usually the bobbin nut can be easily procured. Also, this causes a great variety in its types, which in this range of masoorah beads are made of different materials.

The types of materials from which the bead is made are stainless steel, cast iron, aluminum, nickel, copper, brass, galvanized, polymer, bronze, alloy, plastic, rubber, etc.

But the most important types of coil nuts are metal, galvanized and polymer coil nuts.

The application of the bobbin nut

As mentioned earlier, the coil nut is used in connections that have a small diameter and require simple connection and disconnection. As a result, it can be used simultaneously in urban and industrial uses.

Masoureh nut is used in fire protection systems, industrial and construction piping systems, water and sewage systems.

One of the features of the pipe nut is that it creates a leak-proof connection point in the piping system. This feature is very important because it is used to measure and regulate the consumption of piping.
Another feature of the pipe nut is that it can connect the piping system to other channels.
It is also able to connect two pipes of different sizes so that they do not leak at all.
Having high resistance to corrosion and leakage.
Its easy installation is also one of the other advantages of using Masur nuts compared to other solutions.
Its cost-effectiveness and cost savings in terms of its being cheaper or easy to install.
Failure to seal when exposed to extremely low temperatures or freezing
Ease of assembly and disassembly
High resistance in different environmental conditions
Various sizes
Long life
low weight

The material of the coil nut has a direct relationship with its use in the plumbing industry. For example, due to their good sealing, galvanized coil nuts are used to double prevent leakage in piping.

The most common fields of use of pipe beads are sanitary water piping, sewage ventilation and agricultural closed circuits and piping changes. In general, the application of masoorah beads can be summarized in the following cases:

Application of masooreh nut in water, gas and sewage piping industry
Use of spool nut in cut-off and connection valves
Use in construction pipelines
The use of bobbin nuts in the piping of the engine house
Water meters
Connections of cooling and heating equipment such as packages and water heaters

The coil nut is used to connect the pipe to the pipe in coiling the areas where it is not possible to screw. This nut consists of three parts that can be separated from each other. This nut does not leak in any way when using fluid transmission systems, so it is the most used in this field. Of course, this mode depends on a precise and complete connection.

Buying Masoureh beads in Tehran

If you are going to buy a coil nut among the parts you need, you should pay attention to the fact that the field of application and the type of use are very important in choosing the type of coil nut. Usually, metal and galvanized models have more resistance among other types of coil nuts. Unfortunately, non-standard models are also very common in the market, and if the work sensitivity is high, you should buy from reputable companies that are generally members of the oil company’s vendor list. Alborz Part Jahan Company is one of the largest producers of this product in the country.

One of the biggest challenges in the steel type of this product is the casting method instead of the forging method.

Due to the high demand for masoorah beads, there is no need to worry as it is easily available anywhere for procurement.